Win32_PnPDevicePropertySint16

Represents a PnP device property of type Sint16.

Represents a PnP device property of type Sint16.

Methods

Win32_PnPDevicePropertySint16 has no methods.

Properties

Win32_PnPDevicePropertySint16 returns 5 properties:

'Data','DeviceID','Key','KeyName','Type'

Unless explicitly marked as writeable, all properties are read-only.

Data

SINT16

The property value.

DeviceID

STRING

Identifies the PnP device.

Key

STRING

The value of the Key Name-Value pair that identifies the Data property.

KeyName

STRING

The name of the Key Name-Value pair that identifies the Data property.

Type

UINT32

The type of the Data property.

Type returns a numeric value. To translate it into a meaningful text, use any of the following approaches:

Use a PowerShell Hashtable
$Type_map = @{
      0 = 'Empty'
      1 = 'Null'
      2 = 'SByte'
      3 = 'Byte'
      4 = 'Int16'
      5 = 'UInt16'
      6 = 'Int32'
      7 = 'Uint32'
      8 = 'Int64'
      9 = 'UInt64'
     10 = 'Float'
     11 = 'Double'
     12 = 'Decimal'
     13 = 'Guid'
     14 = 'Currency'
     15 = 'Date'
     16 = 'FileTime'
     17 = 'Boolean'
     18 = 'String'
     19 = 'SecurityDescriptor'
     20 = 'SecurityDescriptorString'
     21 = 'DEVPROPKEY'
     22 = 'DEVPROPTYPE'
     23 = 'Error'
     24 = 'NTStatus'
     25 = 'StringIndirect'
   4098 = 'SByteArray'
   4099 = 'Binary'
   4100 = 'Int16Array'
   4101 = 'UInt16Array'
   4102 = 'Int64Array'
   4103 = 'UInt64Array'
   4104 = 'FloatArray'
   4105 = 'DoubleArray'
   4106 = 'DecimalArray'
   4107 = 'GuidArray'
   4108 = 'CurrencyArray'
   4109 = 'DateArray'
   4110 = 'FileTimeArray'
   4111 = 'BooleanArray'
   4112 = 'StringList'
   4113 = 'SecurityDescriptorList'
   8210 = 'SecurityDescriptorStringList'
   8211 = 'DEVPROPKEYArray'
   8212 = 'DEVPROPTYPEArray'
   4117 = 'ErrorArray'
   4118 = 'NTStatusArray'
   4119 = 'StringIndirectList'
   4120 = 'Unknown - check in devpropdef.h'
   8217 = 'TBD'
}
Use a switch statement
switch([int]$value)
{
  0          {'Empty'}
  1          {'Null'}
  2          {'SByte'}
  3          {'Byte'}
  4          {'Int16'}
  5          {'UInt16'}
  6          {'Int32'}
  7          {'Uint32'}
  8          {'Int64'}
  9          {'UInt64'}
  10         {'Float'}
  11         {'Double'}
  12         {'Decimal'}
  13         {'Guid'}
  14         {'Currency'}
  15         {'Date'}
  16         {'FileTime'}
  17         {'Boolean'}
  18         {'String'}
  19         {'SecurityDescriptor'}
  20         {'SecurityDescriptorString'}
  21         {'DEVPROPKEY'}
  22         {'DEVPROPTYPE'}
  23         {'Error'}
  24         {'NTStatus'}
  25         {'StringIndirect'}
  4098       {'SByteArray'}
  4099       {'Binary'}
  4100       {'Int16Array'}
  4101       {'UInt16Array'}
  4102       {'Int64Array'}
  4103       {'UInt64Array'}
  4104       {'FloatArray'}
  4105       {'DoubleArray'}
  4106       {'DecimalArray'}
  4107       {'GuidArray'}
  4108       {'CurrencyArray'}
  4109       {'DateArray'}
  4110       {'FileTimeArray'}
  4111       {'BooleanArray'}
  4112       {'StringList'}
  4113       {'SecurityDescriptorList'}
  8210       {'SecurityDescriptorStringList'}
  8211       {'DEVPROPKEYArray'}
  8212       {'DEVPROPTYPEArray'}
  4117       {'ErrorArray'}
  4118       {'NTStatusArray'}
  4119       {'StringIndirectList'}
  4120       {'Unknown - check in devpropdef.h'}
  8217       {'TBD'}
  default    {"$value"}
}
Use Enum structure
Enum EnumType
{
  Empty                          = 0
  Null                           = 1
  SByte                          = 2
  Byte                           = 3
  Int16                          = 4
  UInt16                         = 5
  Int32                          = 6
  Uint32                         = 7
  Int64                          = 8
  UInt64                         = 9
  Float                          = 10
  Double                         = 11
  Decimal                        = 12
  Guid                           = 13
  Currency                       = 14
  Date                           = 15
  FileTime                       = 16
  Boolean                        = 17
  String                         = 18
  SecurityDescriptor             = 19
  SecurityDescriptorString       = 20
  DEVPROPKEY                     = 21
  DEVPROPTYPE                    = 22
  Error                          = 23
  NTStatus                       = 24
  StringIndirect                 = 25
  SByteArray                     = 4098
  Binary                         = 4099
  Int16Array                     = 4100
  UInt16Array                    = 4101
  Int64Array                     = 4102
  UInt64Array                    = 4103
  FloatArray                     = 4104
  DoubleArray                    = 4105
  DecimalArray                   = 4106
  GuidArray                      = 4107
  CurrencyArray                  = 4108
  DateArray                      = 4109
  FileTimeArray                  = 4110
  BooleanArray                   = 4111
  StringList                     = 4112
  SecurityDescriptorList         = 4113
  SecurityDescriptorStringList   = 8210
  DEVPROPKEYArray                = 8211
  DEVPROPTYPEArray               = 8212
  ErrorArray                     = 4117
  NTStatusArray                  = 4118
  StringIndirectList             = 4119
  Unknown_check_in_devpropdefh   = 4120
  TBD                            = 8217
}

Examples

Use $Type_map in a calculated property for Select-Object
<# 
  this example uses a hashtable to translate raw numeric values for 
  property "Type" to friendly text

  Note: to use other properties than "Type", look up the appropriate 
  translation hashtable for the property you would like to use instead.
#>

#region define hashtable to translate raw values to friendly text

# Please note: this hashtable is specific for property "Type" 
# to translate other properties, use their translation table instead
$Type_map = @{
      0 = 'Empty'
      1 = 'Null'
      2 = 'SByte'
      3 = 'Byte'
      4 = 'Int16'
      5 = 'UInt16'
      6 = 'Int32'
      7 = 'Uint32'
      8 = 'Int64'
      9 = 'UInt64'
     10 = 'Float'
     11 = 'Double'
     12 = 'Decimal'
     13 = 'Guid'
     14 = 'Currency'
     15 = 'Date'
     16 = 'FileTime'
     17 = 'Boolean'
     18 = 'String'
     19 = 'SecurityDescriptor'
     20 = 'SecurityDescriptorString'
     21 = 'DEVPROPKEY'
     22 = 'DEVPROPTYPE'
     23 = 'Error'
     24 = 'NTStatus'
     25 = 'StringIndirect'
   4098 = 'SByteArray'
   4099 = 'Binary'
   4100 = 'Int16Array'
   4101 = 'UInt16Array'
   4102 = 'Int64Array'
   4103 = 'UInt64Array'
   4104 = 'FloatArray'
   4105 = 'DoubleArray'
   4106 = 'DecimalArray'
   4107 = 'GuidArray'
   4108 = 'CurrencyArray'
   4109 = 'DateArray'
   4110 = 'FileTimeArray'
   4111 = 'BooleanArray'
   4112 = 'StringList'
   4113 = 'SecurityDescriptorList'
   8210 = 'SecurityDescriptorStringList'
   8211 = 'DEVPROPKEYArray'
   8212 = 'DEVPROPTYPEArray'
   4117 = 'ErrorArray'
   4118 = 'NTStatusArray'
   4119 = 'StringIndirectList'
   4120 = 'Unknown - check in devpropdef.h'
   8217 = 'TBD'
}

#endregion define hashtable

#region define calculated property (to be used with Select-Object)

<#
  a calculated property is defined by a hashtable with keys "Name" and "Expression"
  "Name" defines the name of the property (in this example, it is "Type", but you can rename it to anything else)
  "Expression" defines a scriptblock that calculates the content of this property
  in this example, the scriptblock uses the hashtable defined earlier to translate each numeric
  value to its friendly text counterpart:
#>
 
$Type = @{
  Name = 'Type'
  Expression = {
    # property is an array, so process all values
    $value = $_.Type)
    $Type_map[[int]$value]
  }  
}
#endregion define calculated property

# retrieve the instances, and output the properties "Caption" and "Type". The latter
# is defined by the hashtable in $Type: 
Get-CimInstance -Class Win32_PnPDevicePropertySint16 | Select-Object -Property Caption, $Type

# ...or dump content of property Type:
$friendlyValues = Get-CimInstance -Class Win32_PnPDevicePropertySint16 | 
    Select-Object -Property $Type |
    Select-Object -ExpandProperty Type

# output values
$friendlyValues

# output values as comma separated list
$friendlyValues -join ', '

# output values as bullet list
$friendlyValues | ForEach-Object { "- $_" }
Use $Type_map to directly translate raw values from an instance
<# 
  this example uses a hashtable to manually translate raw numeric values 
  for property "Win32_PnPDevicePropertySint16" to friendly text. This approach is ideal when
  there is just one instance to work with.

  Note: to use other properties than "Win32_PnPDevicePropertySint16", look up the appropriate 
  translation hashtable for the property you would like to use instead.
#>

#region define hashtable to translate raw values to friendly text

# Please note: this hashtable is specific for property "Win32_PnPDevicePropertySint16" 
# to translate other properties, use their translation table instead
$Type_map = @{
      0 = 'Empty'
      1 = 'Null'
      2 = 'SByte'
      3 = 'Byte'
      4 = 'Int16'
      5 = 'UInt16'
      6 = 'Int32'
      7 = 'Uint32'
      8 = 'Int64'
      9 = 'UInt64'
     10 = 'Float'
     11 = 'Double'
     12 = 'Decimal'
     13 = 'Guid'
     14 = 'Currency'
     15 = 'Date'
     16 = 'FileTime'
     17 = 'Boolean'
     18 = 'String'
     19 = 'SecurityDescriptor'
     20 = 'SecurityDescriptorString'
     21 = 'DEVPROPKEY'
     22 = 'DEVPROPTYPE'
     23 = 'Error'
     24 = 'NTStatus'
     25 = 'StringIndirect'
   4098 = 'SByteArray'
   4099 = 'Binary'
   4100 = 'Int16Array'
   4101 = 'UInt16Array'
   4102 = 'Int64Array'
   4103 = 'UInt64Array'
   4104 = 'FloatArray'
   4105 = 'DoubleArray'
   4106 = 'DecimalArray'
   4107 = 'GuidArray'
   4108 = 'CurrencyArray'
   4109 = 'DateArray'
   4110 = 'FileTimeArray'
   4111 = 'BooleanArray'
   4112 = 'StringList'
   4113 = 'SecurityDescriptorList'
   8210 = 'SecurityDescriptorStringList'
   8211 = 'DEVPROPKEYArray'
   8212 = 'DEVPROPTYPEArray'
   4117 = 'ErrorArray'
   4118 = 'NTStatusArray'
   4119 = 'StringIndirectList'
   4120 = 'Unknown - check in devpropdef.h'
   8217 = 'TBD'
}

#endregion define hashtable

# get one instance:
$instance = Get-CimInstance -Class Win32_PnPDevicePropertySint16 | Select-Object -First 1

<#
  IMPORTANT: this example processes only one instance to illustrate
  the number-to-text translation. To process all instances, replace
  "Select-Object -First 1" with a "Foreach-Object" loop, and use
  the iterator variable $_ instead of $instance
#>

# query the property
$rawValue = $instance.Type  

# translate raw value to friendly text:
$friendlyName = $Type_map[[int]$rawValue]

# output value
$friendlyName
Use a switch statement inside a calculated property for Select-Object
<# 
  this example uses a switch clause to translate raw numeric 
  values for property "Type" to friendly text. The switch
  clause is embedded into a calculated property so there is
  no need to refer to external variables for translation.

  Note: to use other properties than "Type", look up the appropriate 
  translation switch clause for the property you would like to use instead.
#>

#region define calculated property (to be used with Select-Object)

<#
  a calculated property is defined by a hashtable with keys "Name" and "Expression"
  "Name" defines the name of the property (in this example, it is "Type", but you can rename it to anything else)
  "Expression" defines a scriptblock that calculates the content of this property
  in this example, the scriptblock uses the hashtable defined earlier to translate each numeric
  value to its friendly text counterpart:
#>
 
$Type = @{
  Name = 'Type'
  Expression = {
    # property is an array, so process all values
    $value = $_.BiosCharacteristics
    
    switch([int]$value)
      {
        0          {'Empty'}
        1          {'Null'}
        2          {'SByte'}
        3          {'Byte'}
        4          {'Int16'}
        5          {'UInt16'}
        6          {'Int32'}
        7          {'Uint32'}
        8          {'Int64'}
        9          {'UInt64'}
        10         {'Float'}
        11         {'Double'}
        12         {'Decimal'}
        13         {'Guid'}
        14         {'Currency'}
        15         {'Date'}
        16         {'FileTime'}
        17         {'Boolean'}
        18         {'String'}
        19         {'SecurityDescriptor'}
        20         {'SecurityDescriptorString'}
        21         {'DEVPROPKEY'}
        22         {'DEVPROPTYPE'}
        23         {'Error'}
        24         {'NTStatus'}
        25         {'StringIndirect'}
        4098       {'SByteArray'}
        4099       {'Binary'}
        4100       {'Int16Array'}
        4101       {'UInt16Array'}
        4102       {'Int64Array'}
        4103       {'UInt64Array'}
        4104       {'FloatArray'}
        4105       {'DoubleArray'}
        4106       {'DecimalArray'}
        4107       {'GuidArray'}
        4108       {'CurrencyArray'}
        4109       {'DateArray'}
        4110       {'FileTimeArray'}
        4111       {'BooleanArray'}
        4112       {'StringList'}
        4113       {'SecurityDescriptorList'}
        8210       {'SecurityDescriptorStringList'}
        8211       {'DEVPROPKEYArray'}
        8212       {'DEVPROPTYPEArray'}
        4117       {'ErrorArray'}
        4118       {'NTStatusArray'}
        4119       {'StringIndirectList'}
        4120       {'Unknown - check in devpropdef.h'}
        8217       {'TBD'}
        default    {"$value"}
      }
      
  }  
}
#endregion define calculated property

# retrieve all instances...
Get-CimInstance -ClassName Win32_PnPDevicePropertySint16 | 
  # ...and output properties "Caption" and "Type". The latter is defined
  # by the hashtable in $Type:
  Select-Object -Property Caption, $Type
Use the Enum from above to auto-translate the code values
<# 
  this example translates raw values by means of type conversion
  the friendly names are defined as enumeration using the
  keyword "enum" (PowerShell 5 or better)
  
  The raw value(s) are translated to friendly text by 
  simply converting them into the enum type.
  
  Note: to use other properties than "Win32_PnPDevicePropertySint16", look up the appropriate 
  enum definition for the property you would like to use instead.
#>


#region define enum with value-to-text translation:
Enum EnumType
{
  Empty                          = 0
  Null                           = 1
  SByte                          = 2
  Byte                           = 3
  Int16                          = 4
  UInt16                         = 5
  Int32                          = 6
  Uint32                         = 7
  Int64                          = 8
  UInt64                         = 9
  Float                          = 10
  Double                         = 11
  Decimal                        = 12
  Guid                           = 13
  Currency                       = 14
  Date                           = 15
  FileTime                       = 16
  Boolean                        = 17
  String                         = 18
  SecurityDescriptor             = 19
  SecurityDescriptorString       = 20
  DEVPROPKEY                     = 21
  DEVPROPTYPE                    = 22
  Error                          = 23
  NTStatus                       = 24
  StringIndirect                 = 25
  SByteArray                     = 4098
  Binary                         = 4099
  Int16Array                     = 4100
  UInt16Array                    = 4101
  Int64Array                     = 4102
  UInt64Array                    = 4103
  FloatArray                     = 4104
  DoubleArray                    = 4105
  DecimalArray                   = 4106
  GuidArray                      = 4107
  CurrencyArray                  = 4108
  DateArray                      = 4109
  FileTimeArray                  = 4110
  BooleanArray                   = 4111
  StringList                     = 4112
  SecurityDescriptorList         = 4113
  SecurityDescriptorStringList   = 8210
  DEVPROPKEYArray                = 8211
  DEVPROPTYPEArray               = 8212
  ErrorArray                     = 4117
  NTStatusArray                  = 4118
  StringIndirectList             = 4119
  Unknown_check_in_devpropdefh   = 4120
  TBD                            = 8217
}

#endregion define enum

# get one instance:
$instance = Get-CimInstance -Class Win32_PnPDevicePropertySint16 | Select-Object -First 1

<#
  IMPORTANT: this example processes only one instance to focus on
  the number-to-text type conversion. 
  
  To process all instances, replace   "Select-Object -First 1" 
  with a "Foreach-Object" loop, and use the iterator variable 
  $_ instead of $instance
#>

# query the property:
$rawValue = $instance.Type

#region using strict type conversion

<#
  Note: strict type conversion fails if the raw value is 
  not defined by the enum. So if the list of allowable values
  was extended and the enum does not match the value,
  an exception is thrown
#>

# convert the property to the enum **Type** 
[EnumType]$rawValue 

# get a comma-separated string:
[EnumType]$rawValue -join ',' 
#endregion

#region using operator "-as"

<#
  Note: the operator "-as" accepts values not defined
  by the enum and returns $null instead of throwing
  an exception
#>

$rawValue -as [EnumType]
#endregion

Enums must cover all possible values. If Type returns a value that is not defined in the enum, an exception occurs. The exception reports the value that was missing in the enum. To fix, add the missing value to the enum.

Examples

List all instances of Win32_PnPDevicePropertySint16
Get-CimInstance -ClassName Win32_PnPDevicePropertySint16

Learn more about Get-CimInstance and the deprecated Get-WmiObject.

View all properties
Get-CimInstance -ClassName Win32_PnPDevicePropertySint16 -Property *
View key properties only
Get-CimInstance -ClassName Win32_PnPDevicePropertySint16 -Property *

Selecting Properties

To select only some properties, pipe the results to Select-Object -Property a,b,c with a comma-separated list of the properties you require. Wildcards are permitted.

Get-CimInstance always returns all properties but only retrieves the ones that you specify. All other properties are empty but still present. That’s why you need to pipe the results into Select-Object if you want to limit the visible properties, i.e. for reporting.

Selecting Properties

The code below lists all available properties. Remove the ones you do not need:

$properties = 'Data',
              'DeviceID',
              'Key',
              'KeyName',
              'Type'

Get-CimInstance -ClassName Win32_PnPDevicePropertySint16 | Select-Object -Property $properties
Limiting Network Bandwidth

If you work remotely, it makes sense to limit network bandwidth by filtering the properties on the server side, too:

Get-CimInstance -Class Win32_PnPDevicePropertySint16 -Property $property | 
Select-Object -Property $property

Selecting Instances

To select some instances, use Get-CimInstance and a WMI Query. The wildcard character in WMI Queries is % (and not “*”).

The parameter -Filter runs a simple query.

Listing all instances where the property Caption starts with “A”
Get-CimInstance -Class Win32_PnPDevicePropertySint16 -Filter 'Caption LIKE "a%"' 
Using a WQL Query

The parameter -Query uses a query similar to SQL and combines the parameters -Filter and -Property. This returns all instances where the property Caption starts with “A”, and returns the properties specified:

Get-CimInstance -Query "SELECT Type, Data, Key, KeyName FROM Win32_PnPDevicePropertySint16 WHERE Caption LIKE 'a%'"

Any property you did not specify is still present but empty. You might need to use Select-Object to remove all unwanted properties:

Get-CimInstance -Query "SELECT Type, Data, Key, KeyName FROM Win32_PnPDevicePropertySint16 WHERE Caption LIKE 'a%'" | Select-Object -Property Type, Data, Key, KeyName

Accessing Remote Computers

To access remote systems, you need to have proper permissions. User the parameter -ComputerName to access one or more remote systems.

Authenticating as Current User
# one or more computer names or IP addresses:
$list = 'server1', 'server2'

# authenticate with your current identity:
$result = Get-CimInstance -ClassName Win32_PnPDevicePropertySint16 -ComputerName $list 
$result
Authenticating as Different User

Use a CIMSession object to authenticate with a new identity:

# one or more computer names or IP addresses:
$list = 'server1', 'server2'

# authenticate with a different identity:
$cred = Get-Credential -Message 'Authenticate to retrieve WMI information:'
$session = New-CimSession -ComputerName $list -Credential $cred

$result = Get-CimInstance Win32_PnPDevicePropertySint16 -CimSession $session

# remove the session after use (if you do not plan to re-use it later)
Remove-CimSession -CimSession $session

$result

Learn more about accessing remote computers.

More Examples

Visit the Example Page for more examples.

Requirements

To use Win32_PnPDevicePropertySint16, the following requirements apply:

PowerShell

Get-CimInstance was introduced with PowerShell Version 3.0, which in turn was introduced on clients with Windows 8 and on servers with Windows Server 2012.

If necessary, update Windows PowerShell to Windows PowerShell 5.1, or install PowerShell 7 side-by-side.

Operating System

Win32_PnPDevicePropertySint16 was introduced on clients with Windows 10 [desktop apps only] and on servers with Windows Server 2016.

Namespace

Win32_PnPDevicePropertySint16 lives in the Namespace Root\CIMV2. This is the default namespace. There is no need to use the -Namespace parameter in Get-CimInstance.

Implementation

Win32_PnPDevicePropertySint16 is implemented in CIMWin32.dll and defined in Cimwin32.mof. Both files are located in the folder C:\Windows\system32\wbem:

explorer $env:windir\system32\wbem
notepad $env:windir\system32\wbem\Cimwin32.mof