Win32_USBHub

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, Caption

ClassCode

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, ClassCode

ConfigManagerErrorCode

UINT32

Win32 Configuration Manager error code.

ConfigManagerErrorCode returns a numeric value. To translate it into a meaningful text, use any of the following approaches:

Use a PowerShell Hashtable

$ConfigManagerErrorCode_map = @{
= 'This device is working properly.'
= 'This device is not configured correctly.'
= 'Windows cannot load the driver for this device.'
= 'The driver for this device might be corrupted, or your system may be running low on memory or other resources.'
= 'This device is not working properly. One of its drivers or your registry might be corrupted.'
= 'The driver for this device needs a resource that Windows cannot manage.'
= 'The boot configuration for this device conflicts with other devices.'
= 'Cannot filter.'
= 'The driver loader for the device is missing.'
= 'This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.'
= 'This device cannot start.'
= 'This device failed.'
= 'This device cannot find enough free resources that it can use.'
= 'Windows cannot verify this device''s resources.'
= 'This device cannot work properly until you restart your computer.'
= 'This device is not working properly because there is probably a re-enumeration problem.'
= 'Windows cannot identify all the resources this device uses.'
= 'This device is asking for an unknown resource type.'
= 'Reinstall the drivers for this device.'
= 'Failure using the VxD loader.'
= 'Your registry might be corrupted.'
= 'System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device.'
= 'This device is disabled.'
= 'System failure: Try changing the driver for this device. If that doesn''t work, see your hardware documentation.'
= 'This device is not present, is not working properly, or does not have all its drivers installed.'
= 'Windows is still setting up this device.'
= 'Windows is still setting up this device.'
= 'This device does not have valid log configuration.'
= 'The drivers for this device are not installed.'
= 'This device is disabled because the firmware of the device did not give it the required resources.'
= 'This device is using an Interrupt Request (IRQ) resource that another device is using.'
= 'This device is not working properly because Windows cannot load the drivers required for this device.'
}

Use a switch statement

switch([int]$value)
{
        {'This device is working properly.'}
        {'This device is not configured correctly.'}
        {'Windows cannot load the driver for this device.'}
        {'The driver for this device might be corrupted, or your system may be running low on memory or other resources.'}
        {'This device is not working properly. One of its drivers or your registry might be corrupted.'}
        {'The driver for this device needs a resource that Windows cannot manage.'}
        {'The boot configuration for this device conflicts with other devices.'}
        {'Cannot filter.'}
        {'The driver loader for the device is missing.'}
        {'This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.'}
       {'This device cannot start.'}
       {'This device failed.'}
       {'This device cannot find enough free resources that it can use.'}
       {'Windows cannot verify this device''s resources.'}
       {'This device cannot work properly until you restart your computer.'}
       {'This device is not working properly because there is probably a re-enumeration problem.'}
       {'Windows cannot identify all the resources this device uses.'}
       {'This device is asking for an unknown resource type.'}
       {'Reinstall the drivers for this device.'}
       {'Failure using the VxD loader.'}
       {'Your registry might be corrupted.'}
       {'System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device.'}
       {'This device is disabled.'}
       {'System failure: Try changing the driver for this device. If that doesn''t work, see your hardware documentation.'}
       {'This device is not present, is not working properly, or does not have all its drivers installed.'}
       {'Windows is still setting up this device.'}
       {'Windows is still setting up this device.'}
       {'This device does not have valid log configuration.'}
       {'The drivers for this device are not installed.'}
       {'This device is disabled because the firmware of the device did not give it the required resources.'}
       {'This device is using an Interrupt Request (IRQ) resource that another device is using.'}
       {'This device is not working properly because Windows cannot load the drivers required for this device.'}
  default    {"$value"}
}

Use Enum structure

Enum EnumConfigManagerErrorCode
{
  This_device_is_working_properly                              = 0
  This_device_is_not_configured_correctly                      = 1
  Windows_cannot_load_the_driver_for_this_device               = 2
  The_driver_for_this_device_might_be_corrupted_or_your_system_may_be_running_low_on_memory_or_other_resources = 3
  This_device_is_not_working_properly_One_of_its_drivers_or_your_registry_might_be_corrupted = 4
  The_driver_for_this_device_needs_a_resource_that_Windows_cannot_manage = 5
  The_boot_configuration_for_this_device_conflicts_with_other_devices = 6
  Cannot_filter                                                = 7
  The_driver_loader_for_the_device_is_missing                  = 8
  This_device_is_not_working_properly_because_the_controlling_firmware_is_reporting_the_resources_for_the_device_incorrectly = 9
  This_device_cannot_start                                     = 10
  This_device_failed                                           = 11
  This_device_cannot_find_enough_free_resources_that_it_can_use = 12
  Windows_cannot_verify_this_devices_resources                 = 13
  This_device_cannot_work_properly_until_you_restart_your_computer = 14
  This_device_is_not_working_properly_because_there_is_probably_a_re_enumeration_problem = 15
  Windows_cannot_identify_all_the_resources_this_device_uses   = 16
  This_device_is_asking_for_an_unknown_resource_type           = 17
  Reinstall_the_drivers_for_this_device                        = 18
  Failure_using_the_VxD_loader                                 = 19
  Your_registry_might_be_corrupted                             = 20
  System_failure_Try_changing_the_driver_for_this_device_If_that_does_not_work_see_your_hardware_documentation_Windows_is_removing_this_device = 21
  This_device_is_disabled                                      = 22
  System_failure_Try_changing_the_driver_for_this_device_If_that_doesnt_work_see_your_hardware_documentation = 23
  This_device_is_not_present_is_not_working_properly_or_does_not_have_all_its_drivers_installed = 24
  Windows_is_still_setting_up_this_device1                     = 25
  Windows_is_still_setting_up_this_device2                     = 26
  This_device_does_not_have_valid_log_configuration            = 27
  The_drivers_for_this_device_are_not_installed                = 28
  This_device_is_disabled_because_the_firmware_of_the_device_did_not_give_it_the_required_resources = 29
  This_device_is_using_an_Interrupt_Request_IRQ_resource_that_another_device_is_using = 30
  This_device_is_not_working_properly_because_Windows_cannot_load_the_drivers_required_for_this_device = 31
}

Examples

Use $ConfigManagerErrorCode_map in a calculated property for Select-Object

<# 
  this example uses a hashtable to translate raw numeric values for 
  property "ConfigManagerErrorCode" to friendly text

  Note: to use other properties than "ConfigManagerErrorCode", look up the appropriate 
  translation hashtable for the property you would like to use instead.
#>

#region define hashtable to translate raw values to friendly text

# Please note: this hashtable is specific for property "ConfigManagerErrorCode" 
# to translate other properties, use their translation table instead
$ConfigManagerErrorCode_map = @{
      0 = 'This device is working properly.'
      1 = 'This device is not configured correctly.'
      2 = 'Windows cannot load the driver for this device.'
      3 = 'The driver for this device might be corrupted, or your system may be running low on memory or other resources.'
      4 = 'This device is not working properly. One of its drivers or your registry might be corrupted.'
      5 = 'The driver for this device needs a resource that Windows cannot manage.'
      6 = 'The boot configuration for this device conflicts with other devices.'
      7 = 'Cannot filter.'
      8 = 'The driver loader for the device is missing.'
      9 = 'This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.'
     10 = 'This device cannot start.'
     11 = 'This device failed.'
     12 = 'This device cannot find enough free resources that it can use.'
     13 = 'Windows cannot verify this device''s resources.'
     14 = 'This device cannot work properly until you restart your computer.'
     15 = 'This device is not working properly because there is probably a re-enumeration problem.'
     16 = 'Windows cannot identify all the resources this device uses.'
     17 = 'This device is asking for an unknown resource type.'
     18 = 'Reinstall the drivers for this device.'
     19 = 'Failure using the VxD loader.'
     20 = 'Your registry might be corrupted.'
     21 = 'System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device.'
     22 = 'This device is disabled.'
     23 = 'System failure: Try changing the driver for this device. If that doesn''t work, see your hardware documentation.'
     24 = 'This device is not present, is not working properly, or does not have all its drivers installed.'
     25 = 'Windows is still setting up this device.'
     26 = 'Windows is still setting up this device.'
     27 = 'This device does not have valid log configuration.'
     28 = 'The drivers for this device are not installed.'
     29 = 'This device is disabled because the firmware of the device did not give it the required resources.'
     30 = 'This device is using an Interrupt Request (IRQ) resource that another device is using.'
     31 = 'This device is not working properly because Windows cannot load the drivers required for this device.'
}

#endregion define hashtable

#region define calculated property (to be used with Select-Object)

<#
  a calculated property is defined by a hashtable with keys "Name" and "Expression"
  "Name" defines the name of the property (in this example, it is "ConfigManagerErrorCode", but you can rename it to anything else)
  "Expression" defines a scriptblock that calculates the content of this property
  in this example, the scriptblock uses the hashtable defined earlier to translate each numeric
  value to its friendly text counterpart:
#>
 
$ConfigManagerErrorCode = @{
  Name = 'ConfigManagerErrorCode'
  Expression = {
    # property is an array, so process all values
    $value = $_.ConfigManagerErrorCode
    $ConfigManagerErrorCode_map[[int]$value]
  }  
}
#endregion define calculated property

# retrieve the instances, and output the properties "Caption" and "ConfigManagerErrorCode". The latter
# is defined by the hashtable in $ConfigManagerErrorCode: 
Get-CimInstance -Class Win32_USBHub | Select-Object -Property Caption, $ConfigManagerErrorCode

# ...or dump content of property ConfigManagerErrorCode:
$friendlyValues = Get-CimInstance -Class Win32_USBHub | 
    Select-Object -Property $ConfigManagerErrorCode |
    Select-Object -ExpandProperty ConfigManagerErrorCode

# output values
$friendlyValues

# output values as comma separated list
$friendlyValues -join ', '

# output values as bullet list
$friendlyValues | ForEach-Object { "- $_" }

Use $ConfigManagerErrorCode_map to directly translate raw values from an instance

<# 
  this example uses a hashtable to manually translate raw numeric values 
  for property "Win32_USBHub" to friendly text. This approach is ideal when
  there is just one instance to work with.

  Note: to use other properties than "Win32_USBHub", look up the appropriate 
  translation hashtable for the property you would like to use instead.
#>

#region define hashtable to translate raw values to friendly text

# Please note: this hashtable is specific for property "Win32_USBHub" 
# to translate other properties, use their translation table instead
$ConfigManagerErrorCode_map = @{
      0 = 'This device is working properly.'
      1 = 'This device is not configured correctly.'
      2 = 'Windows cannot load the driver for this device.'
      3 = 'The driver for this device might be corrupted, or your system may be running low on memory or other resources.'
      4 = 'This device is not working properly. One of its drivers or your registry might be corrupted.'
      5 = 'The driver for this device needs a resource that Windows cannot manage.'
      6 = 'The boot configuration for this device conflicts with other devices.'
      7 = 'Cannot filter.'
      8 = 'The driver loader for the device is missing.'
      9 = 'This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.'
     10 = 'This device cannot start.'
     11 = 'This device failed.'
     12 = 'This device cannot find enough free resources that it can use.'
     13 = 'Windows cannot verify this device''s resources.'
     14 = 'This device cannot work properly until you restart your computer.'
     15 = 'This device is not working properly because there is probably a re-enumeration problem.'
     16 = 'Windows cannot identify all the resources this device uses.'
     17 = 'This device is asking for an unknown resource type.'
     18 = 'Reinstall the drivers for this device.'
     19 = 'Failure using the VxD loader.'
     20 = 'Your registry might be corrupted.'
     21 = 'System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device.'
     22 = 'This device is disabled.'
     23 = 'System failure: Try changing the driver for this device. If that doesn''t work, see your hardware documentation.'
     24 = 'This device is not present, is not working properly, or does not have all its drivers installed.'
     25 = 'Windows is still setting up this device.'
     26 = 'Windows is still setting up this device.'
     27 = 'This device does not have valid log configuration.'
     28 = 'The drivers for this device are not installed.'
     29 = 'This device is disabled because the firmware of the device did not give it the required resources.'
     30 = 'This device is using an Interrupt Request (IRQ) resource that another device is using.'
     31 = 'This device is not working properly because Windows cannot load the drivers required for this device.'
}

#endregion define hashtable

# get one instance:
$instance = Get-CimInstance -Class Win32_USBHub | Select-Object -First 1

<#
  IMPORTANT: this example processes only one instance to illustrate
  the number-to-text translation. To process all instances, replace
  "Select-Object -First 1" with a "Foreach-Object" loop, and use
  the iterator variable $_ instead of $instance
#>

# query the property
$rawValue = $instance.ConfigManagerErrorCode  

# translate raw value to friendly text:
$friendlyName = $ConfigManagerErrorCode_map[[int]$rawValue]

# output value
$friendlyName

Use a switch statement inside a calculated property for Select-Object

<# 
  this example uses a switch clause to translate raw numeric 
  values for property "ConfigManagerErrorCode" to friendly text. The switch
  clause is embedded into a calculated property so there is
  no need to refer to external variables for translation.

  Note: to use other properties than "ConfigManagerErrorCode", look up the appropriate 
  translation switch clause for the property you would like to use instead.
#>

#region define calculated property (to be used with Select-Object)

<#
  a calculated property is defined by a hashtable with keys "Name" and "Expression"
  "Name" defines the name of the property (in this example, it is "ConfigManagerErrorCode", but you can rename it to anything else)
  "Expression" defines a scriptblock that calculates the content of this property
  in this example, the scriptblock uses the hashtable defined earlier to translate each numeric
  value to its friendly text counterpart:
#>
 
$ConfigManagerErrorCode = @{
  Name = 'ConfigManagerErrorCode'
  Expression = {
    # property is an array, so process all values
    $value = $_.ConfigManagerErrorCode
    
    switch([int]$value)
      {
        0          {'This device is working properly.'}
        1          {'This device is not configured correctly.'}
        2          {'Windows cannot load the driver for this device.'}
        3          {'The driver for this device might be corrupted, or your system may be running low on memory or other resources.'}
        4          {'This device is not working properly. One of its drivers or your registry might be corrupted.'}
        5          {'The driver for this device needs a resource that Windows cannot manage.'}
        6          {'The boot configuration for this device conflicts with other devices.'}
        7          {'Cannot filter.'}
        8          {'The driver loader for the device is missing.'}
        9          {'This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.'}
        10         {'This device cannot start.'}
        11         {'This device failed.'}
        12         {'This device cannot find enough free resources that it can use.'}
        13         {'Windows cannot verify this device''s resources.'}
        14         {'This device cannot work properly until you restart your computer.'}
        15         {'This device is not working properly because there is probably a re-enumeration problem.'}
        16         {'Windows cannot identify all the resources this device uses.'}
        17         {'This device is asking for an unknown resource type.'}
        18         {'Reinstall the drivers for this device.'}
        19         {'Failure using the VxD loader.'}
        20         {'Your registry might be corrupted.'}
        21         {'System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device.'}
        22         {'This device is disabled.'}
        23         {'System failure: Try changing the driver for this device. If that doesn''t work, see your hardware documentation.'}
        24         {'This device is not present, is not working properly, or does not have all its drivers installed.'}
        25         {'Windows is still setting up this device.'}
        26         {'Windows is still setting up this device.'}
        27         {'This device does not have valid log configuration.'}
        28         {'The drivers for this device are not installed.'}
        29         {'This device is disabled because the firmware of the device did not give it the required resources.'}
        30         {'This device is using an Interrupt Request (IRQ) resource that another device is using.'}
        31         {'This device is not working properly because Windows cannot load the drivers required for this device.'}
        default    {"$value"}
      }
      
  }  
}
#endregion define calculated property

# retrieve all instances...
Get-CimInstance -ClassName Win32_USBHub | 
  # ...and output properties "Caption" and "ConfigManagerErrorCode". The latter is defined
  # by the hashtable in $ConfigManagerErrorCode:
  Select-Object -Property Caption, $ConfigManagerErrorCode

Use the Enum from above to auto-translate the code values

<# 
  this example translates raw values by means of type conversion
  the friendly names are defined as enumeration using the
  keyword "enum" (PowerShell 5 or better)
  
  The raw value(s) are translated to friendly text by 
  simply converting them into the enum type.
  
  Note: to use other properties than "Win32_USBHub", look up the appropriate 
  enum definition for the property you would like to use instead.
#>


#region define enum with value-to-text translation:
Enum EnumConfigManagerErrorCode
{
  This_device_is_working_properly                              = 0
  This_device_is_not_configured_correctly                      = 1
  Windows_cannot_load_the_driver_for_this_device               = 2
  The_driver_for_this_device_might_be_corrupted_or_your_system_may_be_running_low_on_memory_or_other_resources = 3
  This_device_is_not_working_properly_One_of_its_drivers_or_your_registry_might_be_corrupted = 4
  The_driver_for_this_device_needs_a_resource_that_Windows_cannot_manage = 5
  The_boot_configuration_for_this_device_conflicts_with_other_devices = 6
  Cannot_filter                                                = 7
  The_driver_loader_for_the_device_is_missing                  = 8
  This_device_is_not_working_properly_because_the_controlling_firmware_is_reporting_the_resources_for_the_device_incorrectly = 9
  This_device_cannot_start                                     = 10
  This_device_failed                                           = 11
  This_device_cannot_find_enough_free_resources_that_it_can_use = 12
  Windows_cannot_verify_this_devices_resources                 = 13
  This_device_cannot_work_properly_until_you_restart_your_computer = 14
  This_device_is_not_working_properly_because_there_is_probably_a_re_enumeration_problem = 15
  Windows_cannot_identify_all_the_resources_this_device_uses   = 16
  This_device_is_asking_for_an_unknown_resource_type           = 17
  Reinstall_the_drivers_for_this_device                        = 18
  Failure_using_the_VxD_loader                                 = 19
  Your_registry_might_be_corrupted                             = 20
  System_failure_Try_changing_the_driver_for_this_device_If_that_does_not_work_see_your_hardware_documentation_Windows_is_removing_this_device = 21
  This_device_is_disabled                                      = 22
  System_failure_Try_changing_the_driver_for_this_device_If_that_doesnt_work_see_your_hardware_documentation = 23
  This_device_is_not_present_is_not_working_properly_or_does_not_have_all_its_drivers_installed = 24
  Windows_is_still_setting_up_this_device1                     = 25
  Windows_is_still_setting_up_this_device2                     = 26
  This_device_does_not_have_valid_log_configuration            = 27
  The_drivers_for_this_device_are_not_installed                = 28
  This_device_is_disabled_because_the_firmware_of_the_device_did_not_give_it_the_required_resources = 29
  This_device_is_using_an_Interrupt_Request_IRQ_resource_that_another_device_is_using = 30
  This_device_is_not_working_properly_because_Windows_cannot_load_the_drivers_required_for_this_device = 31
}

#endregion define enum

# get one instance:
$instance = Get-CimInstance -Class Win32_USBHub | Select-Object -First 1

<#
  IMPORTANT: this example processes only one instance to focus on
  the number-to-text type conversion. 
  
  To process all instances, replace   "Select-Object -First 1" 
  with a "Foreach-Object" loop, and use the iterator variable 
  $_ instead of $instance
#>

# query the property:
$rawValue = $instance.ConfigManagerErrorCode

#region using strict type conversion

<#
  Note: strict type conversion fails if the raw value is 
  not defined by the enum. So if the list of allowable values
  was extended and the enum does not match the value,
  an exception is thrown
#>

# convert the property to the enum **ConfigManagerErrorCode** 
[EnumConfigManagerErrorCode]$rawValue 

# get a comma-separated string:
[EnumConfigManagerErrorCode]$rawValue -join ',' 
#endregion

#region using operator "-as"

<#
  Note: the operator "-as" accepts values not defined
  by the enum and returns $null instead of throwing
  an exception
#>

$rawValue -as [EnumConfigManagerErrorCode]
#endregion

Enums must cover all possible values. If ConfigManagerErrorCode returns a value that is not defined in the enum, an exception occurs. The exception reports the value that was missing in the enum. To fix, add the missing value to the enum.

ConfigManagerUserConfig

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, ConfigManagerUserConfig

CreationClassName

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, CreationClassName

CurrentAlternateSettings

UINT8 ARRAY

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, CurrentAlternateSettings

CurrentConfigValue

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, CurrentConfigValue

Description

KEY PROPERTY STRING MAX 256 CHAR

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, Description

DeviceID

An address or other identifying information which uniquely identifies the USBHub.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID

ErrorCleared

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, ErrorCleared

ErrorDescription

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, ErrorDescription

GangSwitched

If TRUE, power is switched to all ports on the hub simultaneously. If FALSE, power is switched individually for each port.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, GangSwitched

InstallDate

DATETIME

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, InstallDate

LastErrorCode

UINT32

Last error code reported by the logical device.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, LastErrorCode

Name

Indicates the name of the USB Hub.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, Name

NumberOfConfigs

Number of device configurations that are defined for the device.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, NumberOfConfigs

NumberOfPorts

Number of downstream ports on the hub, including those embedded in the hub’s silicon.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, NumberOfPorts

PNPDeviceID

Win32 Plug and Play device identifier of the logical device.

Example: “*PNP030b”

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, PNPDeviceID

PowerManagementCapabilities

UINT16 ARRAY

Array of the specific power-related capabilities of a logical device.

0 (0x0)

Unknown

1 (0x1)

Not Supported

2 (0x2)

Disabled

3 (0x3)

Enabled

The power management features are currently enabled but the exact feature set is unknown or the information is unavailable.

4 (0x4)

Power Saving Modes Entered Automatically

The device can change its power state based on usage or other criteria.

5 (0x5)

Power State Settable

The SetPowerState method is supported. This method is found on the parent CIM_LogicalDevice class and can be implemented. For more information, see Designing Managed Object Format (MOF) Classes.

6 (0x6)

Power Cycling Supported

The SetPowerState method can be invoked with the PowerState parameter set to 5 (Power Cycle).

7 (0x7)

Timed Power On Supported

The SetPowerState method can be invoked with the PowerState parameter set to 5 (Power Cycle) and Time set to a specific date and time, or interval, for power-on.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, PowerManagementCapabilities

PowerManagementSupported

If TRUE, the device can be power managed, that is, put into a power-save state. If FALSE, the integer value 1 (“Not Supported”) should be the only entry in the PowerManagementCapabilities array.

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, PowerManagementSupported

ProtocolCode

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, ProtocolCode

Status

Current status of an object. Various operational and nonoperational statuses can be defined. Available values:

$values = 'Degraded','Error','Lost Comm','No Contact','NonRecover','OK','Pred Fail','Service','Starting','Stopping','Stressed','Unknown'

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, Status

StatusInfo

UINT16

1 (0x1)

Other

2 (0x2)

Unknown

3 (0x3)

Enabled

4 (0x4)

Disabled

5 (0x5)

Not Applicable

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, StatusInfo

SubclassCode

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, SubclassCode

SystemCreationClassName

Get-CimInstance -ClassName Win32_USBHub | Select-Object -Property DeviceID, SystemCreationClassName

SystemName